Sorbents
Chemical Sorbent Boom
This petroleum sorbent boom is a 8 inches by 10 feet scrim encased tube of particulate sorbent material secured by a UV resistant netting.
Benefits
· For use in oil-only Sorbent applications.
· Scrim encased tube of particulate Sorbent material is secured by netting.
· Built in attachment clips are provided at each end of the boom, allowing booms to be linked together.
· UV resistant; will not deteriorate or disintegrate.
· Recommended for use in ditches, streams, rivers, lakes, and terminal docks and piers.
Built-in attachment clips on ends of booms allow them to be linked together and overlapped, helping to prevent seepage between the segments. Absorb approximately 20 gals. per boom/double boom. Sizes: 8″ x 10′
Maintenance Sorbent Pads
High capacity petroleum sorbents have a scrim on one side to increase strength and help eliminate linting.
Benefits
· For use in oil only Sorbent applications.
· Scrim on one side increases strength and helps eliminate linting.
· Pads are conveniently sized and may be re-used.
This high capacity, low profile Sorbent pad, picks up petroleum based fluids, will not absorb water. For routine use, cleaning up small spills and wiping contaminated areas. Pads may also be used on a work surface in anticipation of a spill or as a wipe. 100 pads (19 inch X 17 inch) per bale, (37.5 gallons/bale).
Petroleum Sorbent Sweep
The Petroleum Sorbent Sweep, T-126, draws across an “on water spill” to recover the petroleum product. For use in oil-only sorbent applications, this sweep incorporates a rope which is attached to one side of the sorbent material. It is constructed with a durable rope encased in reinforced sorbent material.
Dimension: 21 inches by 100 feet.
- For use in oil-only Sorbent applications
- Measurements: 21 inches by 100 feet
- Ideal for sweeping thin slicks on water
This sweep incorporates a rope which is attached to one side of the sorbent material. This allows the sorbent to be drawn across an “on water spill” to recover the petroleum product
Chemical Sorbent Roll
Can be easily cut to cover small areas or fit tight corners. May be used to cover bench tops in anticipation of a spill while also acting as a work surface. Able to sorb 31 Gallons/roll. Each roll is 15.25 inches by 150 feet.
High capacity sorbents have a scrim on one side to increase strength and help eliminate linting. Rolls of sorbent material are used to cover and sorb large spills or in areas where spills may occur. They can be cut to the desired length and are the most economical way to purchase sorbent
